o1712 tkim tc-00002827/80509 tkim tc-00002048/d2004ea tsim tb-00000072 no.7920-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 2SA2124 bipolar transistor -30v, -2a, low vce(sat), pnp single pcp applicaitons ? voltage regulators, relay drivers, lamp drivers, electrical equipment features ? adoption of mbit processes ? low collector-to-emitter saturation voltage ? large current capacity ? high-speed switching speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo --30 v collector-to-emitter voltage v ceo --30 v emitter-to-base voltage v ebo -- 6 v collector current i c -- 2 a collector current (pulse) i cp -- 5 a continued on next page. package dimensions unit : mm (typ) 7007b-004 ordering number : en7920b product & package information ? package : pcp ? jeita, jedec : sc-62, sot-89, to-243 ? minimum packing quantity : 1,000 pcs./reel packing type: td marking electrical connection td 1 : base 2 : collecto r 3 : emitter pcp 2.5 4.0 1.0 1.5 0.5 0.4 3.0 4.5 1.6 0.4 123 1.5 0.75 top view bottom view 2SA2124-td-e ax lot no. 2 3 1
2SA2124 no.7920-2/7 continued from preceding page. parameter symbol conditions ratings unit base current i b --400 ma collector dissipation p c when mounted on ceramic substrate (450mm 2 0.8mm) 1.3 w tc=25 c 3.5 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =--30v, i e =0a --0.1 a emitter cutoff current i ebo v eb =--4v, i c =0a --0.1 a dc current gain h fe 1v ce =--2v, i c =--100ma 200 560 h fe 2v ce =--2v, i c =--1.5a 65 gain-bandwidth product f t v ce =--10v, i c =--300ma 440 mhz collector-to-emitter saturation voltage v ce (sat) i c =--1.5a, i b =--75ma --0.2 --0.4 v base-to-emitter saturation voltage v be (sat) i c =--1.5a, i b =--75ma --0.95 --1.2 v collector-to-base breakdown voltage v (br)cbo i c =--10 a, i e =0a --30 v collector-to-emitter breakdown voltage v (br)ceo i c =--1ma, r be = --30 v emitter-to-base breakdown voltage v (br)ebo i e =--10 a, i c =0a --6 v output capacitance cob v cb =--10v, f=1mhz 17 pf turn-on time t on see speci ed test circuit. 45 ns storage time t stg 200 ns fall time t f 23 ns switching time test circuit ordering information device package shipping memo 2SA2124-td-e pcp 1,000pcs./reel pb free v r r b v cc = --12v v be =5v + + 50 input outpu t r l 220 f 470 f pw=20 s i b1 d.c. 1% i c i b2 i c =20i b1 = --20i b2 = --0.5a stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty.
2SA2124 no.7920-3/7 -- 2 . 0 -- 1 . 8 -- 1 . 6 -- 1 . 2 -- 1 . 4 -- 0 . 8 -- 1 . 0 -- 0 . 4 -- 0 . 6 -- 0 . 2 0 -- 0 . 4 0 --0.8 --1.2 --1.6 --2.0 -- 0 . 2 -- 0 . 6 -- 1 . 0 -- 1 . 4 -- 1 . 8 i c -- v ce it07248 --10ma --15ma --20ma --25ma --40ma i b =0ma --5ma --2ma ta=75 c 25 c --25 c v ce = --2v -- 2 . 0 -- 1 . 0 -- 0 . 5 -- 1 . 5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 i c -- v be it07249 --35ma --30ma collector-to-emitter voltage, v ce -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a cob -- v cb 5 3 2 10 7 -- 0 . 1 37 25 37 25 3 2 --1.0 --10 5 it07252 f=1mhz -- 0 . 1 2 3 5 7 2 3 5 --0.01 --0.01 --0.1 23 57 23 57 23 5 -- 1 . 0 v ce (sat) -- i c ta=75 c -- 2 5 c it07253 i c / i b =20 25 c it07255 a s o v be (sat) -- i c 3 -- 1 . 0 3 --0.01 --0.1 --1.0 ta= --25 c 25 c 75 c 2 7 5 23 57 23 5 23 57 i c / i b =20 it07254 collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter voltage, v ce -- v collector current, i c -- a 2 3 5 7 2 3 5 7 2 3 5 7 -- 1 . 0 -- 1 0 -- 0 . 1 -- 0 . 0 1 23 57 -- 0 . 1 -- 1 . 0 23 57 -- 1 0 23 5 100ms dc operation 10ms i cp = --5a i c = --2a 1ms dissipation limited s / b limited 100 s 500 s < 10 s tc=25 c single pulse ta=75 c 25 c --25 c 7 100 7 5 3 2 5 --0.01 3 25 -- 0 . 1 73 257 23 -- 1 . 0 h fe -- i c v ce = --2v it07250 f t -- i c 100 2 7 5 1000 7 5 3 -- 0 . 0 1 257 3257 323 -- 0 . 1 -- 1 . 0 it07251 v ce = --10v collector current, i c -- a dc current gain, h fe gain-bandwidth product, f t -- mhz collector current, i c -- a
2SA2124 no.7920-4/7 0 1.4 0.6 0.8 1.0 1.2 1.3 0.4 0.2 20 060 40 80 100 140 120 160 p c -- ta it07256 collector dissipation, p c -- w ambient temperature, ta -- c mounted on a ceramic board (450mm 2 ? 0.8mm) p c -- tc collector dissipation, p c -- w case temperature, tc -- c 4.0 0.5 0 160 20 0 it08355 40 60 80 1.0 1.5 2.0 2.5 3.0 3.5 100 120 140
2SA2124 no.7920-5/7 bag packing speci cation 2SA2124-td-e
2SA2124 no.7920-6/7 outline drawing land pattern example 2SA2124-td-e mass (g) unit 0.058 * for reference mm unit: mm 2.2 1.0 1.8 1.5 0.9 3.7 1.5 3.0 1.0 45 45
2SA2124 ps no.7920-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
